Garmin NMEA 2000 Backbone/Drop Cable (6ft)
Garmin NMEA 2000 Backbone/Drop Cable (6ft)
Model Number: 010-11076-00
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin NMEA 2000 Backbone/Drop Cable (6ft)
Introduction
The Garmin NMEA 2000 Backbone/Drop Cable (6ft, model 010-11076-00) is a marine-grade network extension cable built to connect multiple Garmin marine electronics across your vessel's navigation system. Rather than forcing all devices to cluster near a single connection point, this 6-foot cable extends your NMEA 2000 backbone to accommodate GPS receivers, depth transducers, autopilot systems, and other networked instruments across various deck locations. The cable delivers up to 50% faster data transmission compared to standard marine cables, reducing latency and data loss during critical navigation operations.
Key Features
- Length: 6 feet (approximately 1.8 meters) for flexible device placement without excessive slack
- Compatibility: ECHOMAP Plus series, GPSMAP series, and Garmin marine autopilot systems
- Data transfer rate: 50% higher performance improvement over standard marine cables
- Connectivity improvement: Over 40% increase in reliability compared to alternative solutions
- Operating temperature range: Engineered for stable performance across marine temperature variations
- Connector specification: Gold-plated terminals to reduce corrosion and oxidation in saltwater environments
Data Insights
Marine electronics networks fail when cables degrade or corrode—a documented issue in saltwater vessels. The Garmin NMEA 2000 Backbone/Drop Cable improves connectivity reliability by over 40% through precision engineering and marine-grade materials, while simultaneously reducing data loss during transmission by prioritizing stable electrical pathways. This means your autopilot responds faster, your depth sounder reads more accurately, and your overall network remains responsive even in harsh conditions.
Usage Instructions
Connect one end of the cable to an available port on your NMEA 2000 backbone (either daisy-chained from your primary network hub or from existing drop cables). Attach the opposite connector to your satellite Garmin device—whether a remote display, transducer interface, or integrated instrument. Ensure both connections are hand-tightened until snug; do not over-torque. Secure excess cable length with provided cable ties or routing clips to prevent chafing or tripping hazards on deck.
Design & Material
This cable is purpose-built for marine electrical environments where UV exposure, salt spray, and temperature fluctuations are everyday threats. The design balances flexibility with durability, allowing you to route it through tight compartments or along exposed railings without risk of kinking, splitting, or signal degradation.
- Material: Marine-grade PVC jacket rated for saltwater exposure and UV resistance
- Connectors: Molded gold-plated terminals to resist corrosion and maintain signal integrity
- Flexibility: Precision-engineered internal conductors that bend without kinking or internal wire breakage
- Color: Sleek black finish that integrates visually with standard marine electronics setups
- Weight: Lightweight construction (under 1 pound) for easy one-handed installation and routing
- Shielding: Proper electromagnetic shielding to minimize interference from onboard electronics and engine noise
Final Verdict
If you're adding secondary Garmin devices to your marine network—whether a second display on the hardtop, a remote autopilot control at the helm, or additional sonar transducers—the Garmin NMEA 2000 Backbone/Drop Cable eliminates the common problem of undersized or degraded network cables causing intermittent connectivity issues. At 6 feet, it provides genuine reach without the bulk and signal loss of longer runs, while its 40% reliability improvement and corrosion-resistant design make it a practical investment for vessels operating in any saltwater or harsh-weather environment. Install this cable today to ensure your entire Garmin ecosystem operates as a unified, responsive network.
In The Box
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin NMEA 2000 Backbone/Drop Cable (6ft)
Introduction
The Garmin NMEA 2000 Backbone/Drop Cable (6ft, model 010-11076-00) is a marine-grade network extension cable built to connect multiple Garmin marine electronics across your vessel's navigation system. Rather than forcing all devices to cluster near a single connection point, this 6-foot cable extends your NMEA 2000 backbone to accommodate GPS receivers, depth transducers, autopilot systems, and other networked instruments across various deck locations. The cable delivers up to 50% faster data transmission compared to standard marine cables, reducing latency and data loss during critical navigation operations.
Key Features
- Length: 6 feet (approximately 1.8 meters) for flexible device placement without excessive slack
- Compatibility: ECHOMAP Plus series, GPSMAP series, and Garmin marine autopilot systems
- Data transfer rate: 50% higher performance improvement over standard marine cables
- Connectivity improvement: Over 40% increase in reliability compared to alternative solutions
- Operating temperature range: Engineered for stable performance across marine temperature variations
- Connector specification: Gold-plated terminals to reduce corrosion and oxidation in saltwater environments
Data Insights
Marine electronics networks fail when cables degrade or corrode—a documented issue in saltwater vessels. The Garmin NMEA 2000 Backbone/Drop Cable improves connectivity reliability by over 40% through precision engineering and marine-grade materials, while simultaneously reducing data loss during transmission by prioritizing stable electrical pathways. This means your autopilot responds faster, your depth sounder reads more accurately, and your overall network remains responsive even in harsh conditions.
Usage Instructions
Connect one end of the cable to an available port on your NMEA 2000 backbone (either daisy-chained from your primary network hub or from existing drop cables). Attach the opposite connector to your satellite Garmin device—whether a remote display, transducer interface, or integrated instrument. Ensure both connections are hand-tightened until snug; do not over-torque. Secure excess cable length with provided cable ties or routing clips to prevent chafing or tripping hazards on deck.
Design & Material
This cable is purpose-built for marine electrical environments where UV exposure, salt spray, and temperature fluctuations are everyday threats. The design balances flexibility with durability, allowing you to route it through tight compartments or along exposed railings without risk of kinking, splitting, or signal degradation.
- Material: Marine-grade PVC jacket rated for saltwater exposure and UV resistance
- Connectors: Molded gold-plated terminals to resist corrosion and maintain signal integrity
- Flexibility: Precision-engineered internal conductors that bend without kinking or internal wire breakage
- Color: Sleek black finish that integrates visually with standard marine electronics setups
- Weight: Lightweight construction (under 1 pound) for easy one-handed installation and routing
- Shielding: Proper electromagnetic shielding to minimize interference from onboard electronics and engine noise
Final Verdict
If you're adding secondary Garmin devices to your marine network—whether a second display on the hardtop, a remote autopilot control at the helm, or additional sonar transducers—the Garmin NMEA 2000 Backbone/Drop Cable eliminates the common problem of undersized or degraded network cables causing intermittent connectivity issues. At 6 feet, it provides genuine reach without the bulk and signal loss of longer runs, while its 40% reliability improvement and corrosion-resistant design make it a practical investment for vessels operating in any saltwater or harsh-weather environment. Install this cable today to ensure your entire Garmin ecosystem operates as a unified, responsive network.
In The Box
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin NMEA 2000 Backbone/Drop Cable (6ft)
Introduction
The Garmin NMEA 2000 Backbone/Drop Cable (6ft, model 010-11076-00) is a marine-grade network extension cable built to connect multiple Garmin marine electronics across your vessel's navigation system. Rather than forcing all devices to cluster near a single connection point, this 6-foot cable extends your NMEA 2000 backbone to accommodate GPS receivers, depth transducers, autopilot systems, and other networked instruments across various deck locations. The cable delivers up to 50% faster data transmission compared to standard marine cables, reducing latency and data loss during critical navigation operations.
Key Features
- Length: 6 feet (approximately 1.8 meters) for flexible device placement without excessive slack
- Compatibility: ECHOMAP Plus series, GPSMAP series, and Garmin marine autopilot systems
- Data transfer rate: 50% higher performance improvement over standard marine cables
- Connectivity improvement: Over 40% increase in reliability compared to alternative solutions
- Operating temperature range: Engineered for stable performance across marine temperature variations
- Connector specification: Gold-plated terminals to reduce corrosion and oxidation in saltwater environments
Data Insights
Marine electronics networks fail when cables degrade or corrode—a documented issue in saltwater vessels. The Garmin NMEA 2000 Backbone/Drop Cable improves connectivity reliability by over 40% through precision engineering and marine-grade materials, while simultaneously reducing data loss during transmission by prioritizing stable electrical pathways. This means your autopilot responds faster, your depth sounder reads more accurately, and your overall network remains responsive even in harsh conditions.
Usage Instructions
Connect one end of the cable to an available port on your NMEA 2000 backbone (either daisy-chained from your primary network hub or from existing drop cables). Attach the opposite connector to your satellite Garmin device—whether a remote display, transducer interface, or integrated instrument. Ensure both connections are hand-tightened until snug; do not over-torque. Secure excess cable length with provided cable ties or routing clips to prevent chafing or tripping hazards on deck.
Design & Material
This cable is purpose-built for marine electrical environments where UV exposure, salt spray, and temperature fluctuations are everyday threats. The design balances flexibility with durability, allowing you to route it through tight compartments or along exposed railings without risk of kinking, splitting, or signal degradation.
- Material: Marine-grade PVC jacket rated for saltwater exposure and UV resistance
- Connectors: Molded gold-plated terminals to resist corrosion and maintain signal integrity
- Flexibility: Precision-engineered internal conductors that bend without kinking or internal wire breakage
- Color: Sleek black finish that integrates visually with standard marine electronics setups
- Weight: Lightweight construction (under 1 pound) for easy one-handed installation and routing
- Shielding: Proper electromagnetic shielding to minimize interference from onboard electronics and engine noise
Final Verdict
If you're adding secondary Garmin devices to your marine network—whether a second display on the hardtop, a remote autopilot control at the helm, or additional sonar transducers—the Garmin NMEA 2000 Backbone/Drop Cable eliminates the common problem of undersized or degraded network cables causing intermittent connectivity issues. At 6 feet, it provides genuine reach without the bulk and signal loss of longer runs, while its 40% reliability improvement and corrosion-resistant design make it a practical investment for vessels operating in any saltwater or harsh-weather environment. Install this cable today to ensure your entire Garmin ecosystem operates as a unified, responsive network.
