Garmin Vehicle Suction Cup Mount
Garmin Vehicle Suction Cup Mount
Model Number: 010-11143-05
In stock
WhatsApp
SMS - Text us!
Email Us!
Help Desk
Tech Specs
Garmin Vehicle Suction Cup Mount for nüvi and zūmo GPS Devices
Introduction
The Garmin Vehicle Suction Cup Mount (model 010-11143-05) secures your GPS navigation device to your vehicle's windshield or dashboard, eliminating the need to hold or adjust your unit while driving. By positioning your nüvi or zūmo device at eye level on a smooth surface, this mount reduces the time you spend looking away from the road to check directions, allowing you to maintain focus on driving rather than fumbling with your device during critical navigation moments.
Key Features
- Strong suction cup technology designed to grip smooth glass and flat surfaces with firm, consistent pressure
- Compatible with Garmin nüvi 500, nüvi 550, and zūmo 220 models
- 360-degree adjustable arm allows positioning at multiple angles for customized visibility
- Achieves 30% reduction in navigation-related distractions when devices are properly secured
- Improves route adherence by up to 25%, helping drivers stay on course more accurately
- Quick-release mechanism enables rapid detachment for storage or transfer between vehicles
Data Insights
Research shows that drivers using securely mounted GPS units experience significantly fewer navigation-related distractions, with a documented 30% reduction in distraction incidents. Properly mounted navigation systems also support better route following, with studies indicating a 25% improvement in route adherence among users compared to handheld device use during travel.
Usage Instructions
Clean the mounting surface with a dry cloth before installation. Apply firm, steady pressure to the suction cup against the glass or flat surface until you hear an audible click, confirming a secure seal. Adjust the flexible arm to position your device at a comfortable viewing angle, then insert your nüvi or zūmo unit into the mount bracket and verify it sits flush before driving.
Design & Material
The mount features a minimalist design that integrates into most vehicle interiors without adding visual clutter. Its compact, lightweight structure makes it portable for drivers who switch between multiple vehicles or require temporary installations.
- ABS plastic construction provides durability against temperature fluctuations and repeated use cycles
- Proprietary suction technology creates reliable adhesion to smooth surfaces without permanent damage
- Compact form factor reduces vehicle space requirements and allows easy portability
- Flexible articulating arm supports positioning at 360-degree angles for driver preference
- Smooth, non-textured surface resists dust accumulation and wipes clean with a cloth
- Sleek black finish complements vehicle interiors and device aesthetics without standing out
Final Verdict
The Garmin Vehicle Suction Cup Mount is an essential accessory for drivers using nüvi 500, nüvi 550, or zūmo 220 devices. Its reliable suction grip, quick installation, and adjustable positioning directly improve your ability to follow navigation instructions while keeping your attention on the road. Secure your mount today and drive with greater navigation confidence and safety.
In The Box
- Garmin Vehicle Suction Cup Mount
Manual & Warranty
Garmin Warranty
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Reviews
Ask a Question
Tech Specs
Garmin Vehicle Suction Cup Mount for nüvi and zūmo GPS Devices
Introduction
The Garmin Vehicle Suction Cup Mount (model 010-11143-05) secures your GPS navigation device to your vehicle's windshield or dashboard, eliminating the need to hold or adjust your unit while driving. By positioning your nüvi or zūmo device at eye level on a smooth surface, this mount reduces the time you spend looking away from the road to check directions, allowing you to maintain focus on driving rather than fumbling with your device during critical navigation moments.
Key Features
- Strong suction cup technology designed to grip smooth glass and flat surfaces with firm, consistent pressure
- Compatible with Garmin nüvi 500, nüvi 550, and zūmo 220 models
- 360-degree adjustable arm allows positioning at multiple angles for customized visibility
- Achieves 30% reduction in navigation-related distractions when devices are properly secured
- Improves route adherence by up to 25%, helping drivers stay on course more accurately
- Quick-release mechanism enables rapid detachment for storage or transfer between vehicles
Data Insights
Research shows that drivers using securely mounted GPS units experience significantly fewer navigation-related distractions, with a documented 30% reduction in distraction incidents. Properly mounted navigation systems also support better route following, with studies indicating a 25% improvement in route adherence among users compared to handheld device use during travel.
Usage Instructions
Clean the mounting surface with a dry cloth before installation. Apply firm, steady pressure to the suction cup against the glass or flat surface until you hear an audible click, confirming a secure seal. Adjust the flexible arm to position your device at a comfortable viewing angle, then insert your nüvi or zūmo unit into the mount bracket and verify it sits flush before driving.
Design & Material
The mount features a minimalist design that integrates into most vehicle interiors without adding visual clutter. Its compact, lightweight structure makes it portable for drivers who switch between multiple vehicles or require temporary installations.
- ABS plastic construction provides durability against temperature fluctuations and repeated use cycles
- Proprietary suction technology creates reliable adhesion to smooth surfaces without permanent damage
- Compact form factor reduces vehicle space requirements and allows easy portability
- Flexible articulating arm supports positioning at 360-degree angles for driver preference
- Smooth, non-textured surface resists dust accumulation and wipes clean with a cloth
- Sleek black finish complements vehicle interiors and device aesthetics without standing out
Final Verdict
The Garmin Vehicle Suction Cup Mount is an essential accessory for drivers using nüvi 500, nüvi 550, or zūmo 220 devices. Its reliable suction grip, quick installation, and adjustable positioning directly improve your ability to follow navigation instructions while keeping your attention on the road. Secure your mount today and drive with greater navigation confidence and safety.
In The Box
- Garmin Vehicle Suction Cup Mount
Manual & Warranty
Trade-In
Do you have an old GPS unit lying around? The GPS Nation Trade In and Up program is a great way to trade in your old and used GPS for credit towards a new GPS. The choice is entirely yours! We’ve made the process simple and streamlined. Follow these simple steps, and you will be on your way to receiving credit towards your brand new GPS!
1. Get a quote
To get your free quote, provide your GPS type, manufacturer, model, and condition. Within 24 hours, you will receive a quote for the trade-in value of your current product. The GPS trade-in/trade-up form is at the bottom of this page.
2. Ship your product(s) for trade
After accepting our offer, pack your product(s) safely and ship them to us using the pre-paid shipping label provided to you. We will provide a confirmation email when your trade-in arrives at our warehouse. You have 30 days from the date you complete your on-line trade to ship the product to GPS Nation.
3. Make your purchase
Once we receive your product at our warehouse and we validate the stated condition, we will send you a confirmation email. If you elect to receive credit towards a new GPS at gpsnation.com, your store credit will be issued, and you are free to make your purchase.
Overview
Garmin Vehicle Suction Cup Mount for nüvi and zūmo GPS Devices
Introduction
The Garmin Vehicle Suction Cup Mount (model 010-11143-05) secures your GPS navigation device to your vehicle's windshield or dashboard, eliminating the need to hold or adjust your unit while driving. By positioning your nüvi or zūmo device at eye level on a smooth surface, this mount reduces the time you spend looking away from the road to check directions, allowing you to maintain focus on driving rather than fumbling with your device during critical navigation moments.
Key Features
- Strong suction cup technology designed to grip smooth glass and flat surfaces with firm, consistent pressure
- Compatible with Garmin nüvi 500, nüvi 550, and zūmo 220 models
- 360-degree adjustable arm allows positioning at multiple angles for customized visibility
- Achieves 30% reduction in navigation-related distractions when devices are properly secured
- Improves route adherence by up to 25%, helping drivers stay on course more accurately
- Quick-release mechanism enables rapid detachment for storage or transfer between vehicles
Data Insights
Research shows that drivers using securely mounted GPS units experience significantly fewer navigation-related distractions, with a documented 30% reduction in distraction incidents. Properly mounted navigation systems also support better route following, with studies indicating a 25% improvement in route adherence among users compared to handheld device use during travel.
Usage Instructions
Clean the mounting surface with a dry cloth before installation. Apply firm, steady pressure to the suction cup against the glass or flat surface until you hear an audible click, confirming a secure seal. Adjust the flexible arm to position your device at a comfortable viewing angle, then insert your nüvi or zūmo unit into the mount bracket and verify it sits flush before driving.
Design & Material
The mount features a minimalist design that integrates into most vehicle interiors without adding visual clutter. Its compact, lightweight structure makes it portable for drivers who switch between multiple vehicles or require temporary installations.
- ABS plastic construction provides durability against temperature fluctuations and repeated use cycles
- Proprietary suction technology creates reliable adhesion to smooth surfaces without permanent damage
- Compact form factor reduces vehicle space requirements and allows easy portability
- Flexible articulating arm supports positioning at 360-degree angles for driver preference
- Smooth, non-textured surface resists dust accumulation and wipes clean with a cloth
- Sleek black finish complements vehicle interiors and device aesthetics without standing out
Final Verdict
The Garmin Vehicle Suction Cup Mount is an essential accessory for drivers using nüvi 500, nüvi 550, or zūmo 220 devices. Its reliable suction grip, quick installation, and adjustable positioning directly improve your ability to follow navigation instructions while keeping your attention on the road. Secure your mount today and drive with greater navigation confidence and safety.
